MATERIAL SAFETY DATA SHEET. Downloadable Version in PDF Format

1. IDENTIFICATION OF PRODUCT AND COMPANY

1.1 Product name:

NAVY STEEL
Water based rust converter / primer

1.2 Company:

D. Adam & Associates / ACTEL Coatings
Clarendon
17 High Cross Avenue
Melrose
TD6 9SQ

+44 (0)1896 822697
07880 805478
www.actel.f9.co.uk

2. COMPOSITION / HAZARDOUS INGREDIENTS

Ingredient name	Cas No.	Contents	Classification
2-butoxy ethanol	111-76-2	<5%

3. HAZARD IDENTIFICATION

On available data this preparation does not carry a hazard classification according to EEC directives 88/379/EEC and 79/831/EEC.

This product may cause soreness in contact with eyes.
Prolonged contact with skin may result in irritation.

4. FIRST AID MEASURES

Eye contact: Wash out with copious amounts of water. If irritation persists seek medical advice.

Skin contact: Wash off with soap and water.

Ingestion: Give water to drink. Obtain medical advice.

5. FIRE FIGHTING MEASURES

This preparation is stable and non-combustible.

6. ACCIDENTAL RELEASE MEASURES

Spillages are considered harmless, however they should be contained using soil or other adsorbent material to prevent contamination of drains and water courses. Waste material from spillages should be disposed of in accordance to local regulations.

Spilled material may cause surfaces to become slippery.

7. HANDLING AND STORAGE

Store securely in the original labelled containers out of reach of children.

Protect from freezing

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure controls: Respiratory protection is not normally required but if spraying applications are involved appropriate masks should be worn.

Personal protection:

Respiratory, wear a simple mask to prevent inhalation of liquid as a vapour.

Hands, the use of suitable gloves is recommended.

Eyes, safety glasses or goggles, (BS2902).

Skin, apron, overalls.

9. PHYSICAL AND CHEMICAL PROPERTIES

State: Liquid
Colour: White
pH-value: 2.0
Boiling point: 100oC
Flash point: N/A
Solubility: Water miscible
Density @ 25°C: 1.20
Odour: Characteristic

10. STABILITY AND REACTIVITY

This product is stable in excess of one year when stored between 5°C and 30°C.

11. TOXICOLOGICAL INFORMATION

This preparation does not carry a hazard classification.

12. ECOLOGICAL INFORMATION

No data available. Do not release into surface waters.

13. DISPOSAL CONSIDERATIONS

The product is not classified as hazardous waste.
Disposal of large quantities as waste must always comply with existing EEC, national and local regulations. Registered waste carriers and licensed disposal sites must be used.

14. Transport considerations

Not classified as hazardous for transportation according to international regulations.

15. REGULATORY INFORMATION

This preparation does not carry a hazard classification according to EEC directives 88/379/EEC, 67/548/EEC and 79/831/EEC.

16. OTHER INFORMATION

This Material Safety Data Sheet follows the requirements of EEC directive 91/155/EEC.

Revision date: January 2007

D. Adam & Associates / ACTEL Coatings, Clarendon, 17 High Cross Avenue, Melrose, TD6 9SQ
Tel: +44 (0)1896 822697 Mob: 07880 805478

"Making the difference in coatings....Safely"